W-122 is a two-way all-weather line array sound reinforcement system with exquisite appearance, compact structure, high sound pressure and high fidelity. *W-122 is equipped with our latest DSP switching mode amplifier module, which can be controlled online. *W-122 can be installed in a variety of combinations. which can be flexibly and conveniently used in all type of applications. *The W-122 cabinet is finished with high-grade black polyurethane paint, which is waterproof and super wear-resistant. The hanging hardware and front grille have undergone tensile strength tests and salt spray tests, making the speaker system suitable for all-weather applications. * W-122 is a bass reflex line array loudspeaker composed of a 4-inch neodymium tweeter and two 12-inch neodymium woofer. The cabinet is made of birch-wood, with a compact structure layout, symmetrical LF speakers, tweeters center.It is also equipped with a magnetic suspension system, which is safe and quick to install. * Applications: auditorium Stadium club mobile performance
| TECHNICAL PARAMETERS | |
| Model | W-122&W-122P（Active） |
| Type | Two-way line array system |
| Frequency Response | 55Hz-20KHz±3dB |
| Power handling | LF 1000W(RMS)4000W(PEAK) HF 120W(RMS)480W(PEAK) |
| Sensitivity | LF 108dB(1W@1M) HF 110dB(1W@1M) |
| Max SPL | LF 138dB(PEAK) HF 140dB(PEAK) |
| Drivers | LF 2×12″(310mm) neodymium woofer 75mm(3in)coil HF 1×4″ neodymium compression driver with 100mm titanium diaphragm |
| Nominal impedance | LF 8 ohm HF 8 ohm |
| Coverage | 120°H×15°V |
| Connections | LF 1(+)1(-) HF 2(+)2(-) |
| Connectors | 2×NL4MP speakon |
| PHYSICAL PARAMETERS | |
| Finish | polyurea coatings |
| Enclosure Material | Birch Plywood |
| Crossover | LF 55Hz-800Hz HF 800Hz-20KHz |
| Dimensions | 800×355×550mm(W×H×D) |
| Packing Dimensions | 875×455×620mm(W×H×D)0.246cbm |
| Net weight | 42.5kg (W-122) /47.5kg(W-122P) |
| Gross weight | 52kg (W-122) /57 kg(W-122P) |
| POWER AMPLIFIER PARAMETERS | |
| Amplifier type | Switching mode amplifier,class D circuit |
| Power Output(RMS) | 2X1200W/8ohm |
| Weight | 5kg |
| Configuration | The amp moduie is built inside W-122P |
W-310&W-180 is a three-way line array system with exquisite appearance, compact structure and high sound pressure. W-310&W-180 is equipped with a newly developed DSP digital power amplifier module, which allows online test adjustment. W-310&W-180 is equipped with a variety of hoisting modes, which can be flexibly and conveniently transported, stacked, hoisted, supported, for various scenarios.
| TECHNICAL PARAMETERS | |
| Model | W-310&W-310P（Active） |
| Type | Three-way line array system |
| Frequency Response | 65Hz-18KHz±3dB |
| Power handling | LF 700W(RMS)2800W(PEAK) MF+HF 250W(RMS)1000W(PEAK) |
| Sensitivity | LF 103dB(1W@1M) MF+HF 107dB(1W@1M) |
| Max SPL | LF 132dB(PEAK) MF+HF 138dB(PEAK) |
| Drivers | LF 2×10″(260mm) neodymium woofer75mm(3in)coil MF 1×8″(210mm) neodymium woofer 50mm(2in)coil HF 2×3″ neodymium compression driver with 75mm titanium diaphragm |
| Nominal impedance | LF 8 ohm MF+HF 8 ohm |
| Coverage | 80°H×10°V |
| Connections | LF 1(+)1(-) MF+HF 2(+)2(-) |
| Connectors | 2×NL4MP speakon |
| PHYSICAL PARAMETERS | |
| Finish | Textured high-density polyurethane coating |
| Enclosure Material | Birch Plywood |
| Crossover | LF 65Hz-250Hz MF+HF 250KHz-18KHz |
| Dimensions | 700×310×520mm(W×H×D) |
| Packing Dimensions | 590×780×410mm(W×H×D)0.19cbm |
| Net weight | 40kg(W-310)/44kg(W-310P) |
| Gross weight | 44kg(W-310)/48kg(W-310P) |
| POWER AMPLIFIER PARAMETERS | |
| Amplifier type | Switching mode amplifier, class D circuit |
| Power Output (RMS) | 2X900W/8ohm |
| Weight | 3.6kg |
| Configuration | The amp module is built inside W-310P |
| TECHNICAL PARAMETERS | |
| Model | W-180&W-180P（Active） |
| Type | Line array subwoofer system |
| Frequency Response | 35Hz-200Hz±3dB |
| Power handling | 1000W(RMS)4000W(PEAK) |
| Sensitivity | 102dB(1W@1M) |
| Max SPL | 136dB(PEAK/1M) |
| Driver | 1×18″(460mm) woofer 100mm(4in)coil |
| Nominal impedance | 8 ohm |
| Connectors | 2×NL4MP speakon |
| PHYSICAL PARAMETERS | |
| Finish | Textured high-density polyurethane coating |
| Enclosure Material | Birch Plywood |
| Dimensions | 700×520×780mm(W×H×D) |
| Packing Dimensions | 770×590×860mm(W×H×D)/0.39cbm |
| Net weight | 63.5kg(W-180)/66kg(W180P) |
| Gross weight | 67.5kg(W-180)/70kg(W180P) |
| POWER AMPLIFIER PARAMETERS | |
| Amplifier type | Switching mode amplifier, class D circuit |
| Power Output (RMS) | DSP 900W/8ohm |
| Weight | 2.6kg |
| Configuration | The amp module is built inside W-180P |
W-4&W-4P is a line array system which is made of two 12″ woofers, two 3″ titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of wave phase philosophy. Wherever low frequency extension is required.
| TECHNICAL PARAMETERS 技术参数 | |
| Model 型号 | W-4&W-4P（Active） |
| Type 类型 | Two-way line array system |
| Frequency Response 频率响应 | 60Hz-18KHz±3dB |
| Power handling 功率 | LF 1200W(RMS)4800W(PEAK) HF 240W(RMS)960W(PEAK) |
| Sensitivity 灵敏度 | LF 106dB(1W@1M) HF 109dB(1W@1M) |
| Max SPL 最大声压 | LF 133dB(PEAK) HF 135dB(PEAK) |
| Drivers单元 | LF 2×12″(310mm) neodymium woofer 75mm(3in)coil HF 2×3″ neodymium compression driver with 75mm titanium diaphragm |
| Nominal impedance 阻抗 | LF 16 ohm HF 16 ohm |
| Coverage 覆盖范围 | 110°H×10°V |
| Connections 音箱连接 | LF 1(+)1(-) HF 2(+)2(-) |
| Connectors 输入连接 | 2×NL4MP speakon |
| PHYSICAL PARAMETERS 物理参数 | |
| Finish 表面处理 | polyurea coatings |
| Enclosure Material箱体材料 | Birch Plywood |
| Crossover 分频建议 | LF 60Hz-1.5KHz HF 1.5KHz-20KHz |
| Dimensions 外形尺寸 | 840×341×458mm(W×H×D) |
| Packing Dimensions 包装尺寸 | 920×420×540mm(W×H×D)0.21cbm |
| Net weight 净重 | 40.5kg (W-4) /43.5kg(W-4P) |
| Gross weight 毛重 | 50kg (W-4) /53 kg(W-4P) |
| POWER AMPLIFIER PARAMETERS 功放参数 | |
| Amplifier type 模块类型 | Switching mode amplifier,class D circuit |
| Power Output(RMS)额定功率 | 2X900W/8ohm 2X1300W/4ohm |
| Weight 重量 | 3.6kg |
| Configuration 配置 | The amp moduie is built inside W-4P |